AVK SUPA MAXI™ FLANGE ADAPTOR, PN10/16
Universal and tensile, A2 bolts, EPDM sealing
Contact
AVK Valves Company Hong Kong Ltd.
Unit 803, 8/F, Pilkem Commercial Centre, 8 Pilkem Street, Jordan, Kowloon Hong Kong
Supa Maxi™ flange adaptor, universal and tensile with A2 bolts / A4 nuts. For drinking water and neutral liquids -10°C to +70°C
AVK’s Supa Maxi™ range of universal tensile couplings sets a new standard. The patented SupaGrip™ sealing support
system with flexible bracket ensures full support of the gasket and tensile strength. Supa Maxi™ couplings are easy to install as they offer ±4° angular deflection in both ends, lifting eyes, and bolts tightened from the sleeve side with no need for retightening. The permanent protection caps protect the couplings during transport and installation.
| Variant 633/00-001 | |
|---|---|
| Connection: | Supa Maxi™ Coupling |
| Material: | Ductile iron |
| DN: | DN40 - DN800 |
| PN: | PN 16 |
Features
- Patented SupaGrip™ sealing support system with flexible bracket ensures full support of the gasket even at minimum pipe size
- Tensile strength on all pipes is ensured by two different metal grip segments - every second of brass for PE/PVC/GRP and of hardened stainless steel for cast iron/ductile iron/steel/stainless steel/asbestos cement pipes.
For PE pipes a support bush is to be used - ±4° angular deflection
- Large sealing ranges
- Ductile iron sleeve and bracket of cast steel with fusion bonded epoxy coating in compliance with DIN 3476 part 1 and EN 14901, GSK approved
- Gasket of drinking water approved EPDM rubber
- Bolts of A2 and nuts of A4 are anti-friction coated to prevent galling
- Permanent protection caps protect the coupling during handling and installation
- Large insertion depth tolerances allow for cutting the pipe slightly angled
- Bolts are tightened from the sleeve side for full access when space is limited
- Re-tightening of bolts is not necessary
- Lifting eye in DN100-800
Downloads
| AVK_SupaMaxi_animation.mp4 |
Reference nos. and dimensions:
| AVK ref. no. | DN mm |
PN Class |
Flange drilling |
Seal range mm |
L mm |
D mm |
H3 mm |
Theoretical weight/kg |
Notes |
|---|---|---|---|---|---|---|---|---|---|
| 633-071-00-006 | 40-50 | PN16 | 10/16 | 48-71 | 197 | 200 | 165 | 5.0 | |
| 633-091-00-006 | 50-65 | PN16 | 10/16 | 69-91 | 197 | 226 | 185 | 6.0 | |
| 633-106-00-006 | 80 | PN16 | 10/16 | 82-106 | 198 | 235 | 200 | 6.5 | |
| 633-133-00-006 | 100 | PN16 | 10/16 | 104-133 | 203 | 268 | 229 | 9.0 | |
| 633-133-01-006 | 80 | PN16 | 10/16 | 104-133 | 210 | 268 | 200 | 9.0 | |
| 633-161-00-006 | 100/125 | PN16 | 10/16 | 132-159 | 198 | 285 | 229 | 11 | |
| 633-161-01-006 | 150 | PN16 | 10/16 | 132-159 | 198 | 285 | 285 | 11 | |
| 633-188-00-006 | 150 | PN16 | 10/16 | 159-188 | 220 | 340 | 285 | 12 | |
| 633-227-00-006 | 200 | PN16 | 10/16 | 193-227 | 243 | 389 | 343 | 19 | |
| 633-257-00-006 | 225 | PN16 | 10/16 | 224-257 | 245 | 437 | 406 | 25 | |
| 633-257-01-006 | 200 | PN16 | 10/16 | 224-257 | 245 | 437 | 343 | 25 | |
| 633-301-00-006 | 250 | PN16 | 10/16 | 266-301 | 254 | 476 | 406 | 28 | |
| 633-356-00-006 | 300 | PN16 | 10/16 | 314-356 | 282 | 545 | 483 | 38 | |
| 633-396-00-006 | 350 | PN16 | 10/16 | 352-396 | 435 | 612 | 540 | 87 | |
| 633-442-00-006 | 400 | PN16 | 10/16 | 392-442 | 447 | 661 | 597 | 80 | |
| 633-510-00-006 | 450 | PN16 | 10/16 | 448-510 | 614 | 740 | 660 | 145 | |
| 633-552-00-006 | 500 | PN16 | 10/16 | 498-552 | 605 | 772 | 735 | 166 | |
| 633-652-00-006 | 600 | PN16 | 10/16 | 604-652 | 634 | 872 | 850 | 213 | |
| 633-842-00-00600004 | 800 | PN16 | 10/16 | 800-842 | 690 | 1100 | 1035 | 437 | For metal/AC pipes // PN16 only for non-tensile // Tensile up to 10 bar. |
| 633-842-00-00600006 | 800 | PN16 | 10/16 | 800-842 | 690 | 1100 | 1035 | 437 | For plastic pipes // PN16 only for non-tensile // Tensile up to 10 bar. |
Components
| 1. | Nut | Stainless steel A4 |
| 2. | Bolt | Stainless steel A2 |
| 3. | Washer | Stainless steel A2 |
| 4. | Grip segment | Stainless steel / brass |
| 5. | Gasket | EPDM rubber |
| 6. | Sleeve | Ductile Iron |
| 7. | Bracket | Cast steel |
| 8. | Protection cap | PE |
Test/Approvals
- DN700 tensile up to 16 bar
- DN800 tensile up to 10 bar
- Approved according to KIWA Certificate K 66561/02
- Belgaqua approved material
- Approved according to ACS-France
- Approved according to SVGW Certificate No. 1205-6041
Standards
- EN 14525
- Universal flange drilling to EN1092 (ISO 7005-2), PN 10/16
