AVK PLUNGER CONTROL VALVE, DUCTILE IRON, PN10/16

SS trim/piston, bronze guides, A4/A2 bolts, Rotork gearbox/handwheel, ON-OFF, 250µm blue RAL5017 EP

Contact AVK in Hong Kong

Contact

AVK Valves Company Hong Kong Ltd.

Unit 803, 8/F, Pilkem Commercial Centre, 8 Pilkem Street, Jordan, Kowloon Hong Kong

Plunger control valve for flow rate control and pressure reducing applications. For water and other neutral and hydrocarbon-free media to max. 70°C.

AVK series 870 are designed as plunger control valves for inline applications. Unlike butterfly- or gate valves, that should only be in either fully open or fully closed position, plunger valves are designed to operate in between and perform control functions in water supply systems.

The design consists of a single-piece body made of epoxy coated ductile iron. Internal components in contact with water are made of either stainless steel or bronze; materials that guarantee a good anti-corrosion performance and a long service life.

Variant 870/0001-001
Connection: Flanged
Material: Ductile iron
DN: DN200 - DN600
PN: PN 16

Features

  • One-piece body construction
  • T-shape main seal located in safety flow area ensuring minimal wear and long service life
  • Maintenance access is conveniently provided by the downstream retaining ring and the upstream cover being attached with screws
  • Low operating torque due to pressure balance in chamber inside
  • Gearbox with handwheel for ON/OFF operation
  • Low head loss coefficient in fully open position due to optimized internal body shape
  • Double O-ring sealed drive shaft with all other shafts and bearings protected against corrosion with O-ring combinations
  • 4 guide rails ensure no vibration during operation and accurate alignment throughout full valve stroke
  • Body in ductile iron with internal parts in stainless steel and bronze guide rails for high corrosion resistance
  • Internally and externally corrosion protected with a coating of blue RAL 5017 fusion bonded epoxy to DIN 3476 and applied in a GSK approved process.

Downloads

Datasheet
Tender Text
Installation, operation and maintenance manuals

Reference nos. and dimensions:

Scroll for more info
AVK ref. no. DN
mm
Flange
drilling
L
mm
L1
mm
H
mm
H1
mm
H2
mm
W1
mm
W2
mm
W3
mm
W4
mm
Theoretical
weight/kg
870-0200-00-046401 200 PN10 400 140 433 190 270 180 225 328 140 95
870-0200-00-146401 200 PN16 400 140 433 190 270 180 225 328 140 95
870-0250-00-046401 250 PN10 450 230 503 225 270 213 300 413 230 157
870-0250-00-146401 250 PN16 450 230 503 225 270 213 300 413 230 157
870-0300-00-046401 300 PN10 500 200 584 261 306 243 328 435 200 198
870-0300-00-146401 300 PN16 500 200 584 261 306 243 328 435 200 198
870-0350-00-046401 350 PN10 550 200 664 301 306 278 370 462 240 257
870-0350-00-146401 350 PN16 550 200 664 301 306 278 370 462 240 257
870-0400-00-046401 400 PN10 600 240 755 342 356 323 430 530 300 380
870-0400-00-146401 400 PN16 600 240 755 342 356 323 430 530 300 380
870-0450-00-046401 450 PN10 650 340 811 370 356 349 460 560 340 508
870-0450-00-146401 450 PN16 650 340 811 370 356 349 460 560 340 508
870-0500-00-046401 500 PN10 700 340 884 397 356 379 490 620 340 598
870-0500-00-146401 500 PN16 700 340 884 397 356 379 490 620 340 598
870-0600-00-046401 600 PN10 800 400 1050 480 356 441 560 690 500 953
870-0600-00-146401 600 PN16 800 400 1050 480 356 441 560 690 500 953
2D/3D drawings
Enquiry
Scroll for more info

Components

1. Upstream cover Stainless steel, cast
2. Crank Stainless steel 1.4308 (CF8), cast
3. Body Ductile iron GJS-500-7 (GGG-50)
4. Push rod Stainless steel
5. Piston Stainless steel
6. Guide rail Bronze CC499K
7. Retainer ring Stainless steel
8. Lock ring Stainless steel
9. Piston flange Stainless steel 1.4308 (CF8), cast
10. Main seal EPDM rubber
11. Lifting eye Stainless steel A4
12. Bush Bronze CC499K
13. Shaft, drive Stainless steel 1.4021
14. Seal housing Bronze CC499K
15. Gearbox Ductile Iron
16. Washer Bronze CC499K
17. Bolt Stainless steel A4
18. O-ring EPDM rubber
19. Split pin Stainless steel A4
20. Washer Stainless steel A4
21. Bush Bronze CC499K
22. Clevis pin Stainless steel A4
23. Key Stainless steel A4
24. Bolt Stainless steel A2

Test/Approvals

  • Hydraulic test according to EN 1074-1 and 5/ EN12266

Standards

  • Face-to-face dimension according to EN 558, Series 15
  • Flange drilling to EN1092, PN10/16
  • Designed according to EN 1074-1/5 & EN1349
0 Files In the package